Joined: 08/6/2010 Platinum Member 
Forum Posts: 504
| Site Reviews Total: | 0 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
Hi, I have a bailey ranger 500/5 on an alko chassis which I fitted an e-GO mover to. the required width of L shaped needed on that was 30mm to 40mm. I had no problem with my chassis so suspect you will be ok to go ahead and fit your mover to yours. perhaps you mis-measured by a fraction.
|