Joined: 05/5/2015 Standard Member
Forum Posts: 5
| Site Reviews Total: | 0 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
Hi, I am new to this site and hope someone can help.
My Rapido caravan has an an aluminium skin with polystyrene insulation. It’s fairly old but in beautiful condition and dry as a bone inside. It didn’t cost me a lot, so I don't want to spend a fortune on it. I started to dig out a small area of aluminium ‘corrosion’ (I know that's not the correct word) and have ended up with a hole around 8" x 10" This goes right through to the interior panelling and there is some of rotted flaking wood and soggy polystyrene insulation. I am now in the process of drying this out. I need to know what I can fill the hole with. Hopefully I can fill it with something then skim over with polyester resin. I was wondering about expanding polystyrene foam . Any helpful tips appreciated!
-------------
John
|
Topic: Hole in side of Caravan
