There is quite often a thermal cutoff on the heater. Try searching for the tech manual for the type of heater on the web to find the location of the cutoff switch.
It's normally a slightly hidden button on the side of the unit
if the fan is blowing and cold air is coming out and all fuses and trips are ok then i suspect the element.Check supply to the element with a meter and make sure youhave a supply.240 volt ac should be present at the element terminals
------------- i dont sell cheap tat.I sell tat cheap
you need to put your hand down the back of the heater (usually inside a cupboard) on the left hand side, you will feel a slight dimple on the panel around about knee height press that, it should start up warm again then
Amazing family weekend with old steam engines, classic car displays, market stalls, and full catering and bar. And camping on site - Save £25 by booking in advance.
Topic: Electric heating
