We have recently acquired a second hand leveller and wondered if someone who also has one can answer a query.
Are the 'arms' which slot either side of the wheel totally parallel with each other or slightly splayed apart?
Any measurements would be appreciated!
Thanks
One thing to watch in use is if it sinks in soft ground, it maybe difficult to remove.
I was in Cornwall a few years back and one guy had been pitched for a few weeks and sank enough to make it difficult to get out.
I think that had to jack it up with blocks.
Just checked and it looks the same and mine so they should be parallel. If they are splayed maybe the previous owner did it to fit around a larger tyre?
Thank you for your reply. We also have a bulldog leveller but too small for current wheel size. Would still be useful to have someone measure their Milenco leveller. Have looked at lots of pictures and they have proved inconclusive. Found a clear diagram of the dimensions of the bulldog version though!
Goto google in your browser and search for milencoi leveller and then click the pictures tab. Lots of pictures there showing the sides should be parallel. Or is it just the dimensions between the arms you need?
My leveller is a bit tight, I just stick a small piece of wood under the tyre when pitching. That ensures it doesnt get stuck.
Amazing family weekend with old steam engines, classic car displays, market stalls, and full catering and bar. And camping on site - Save £25 by booking in advance.
Topic: Milenco aluminium leveller
