I have a abi ace viceroy caravan picked up on Thursday took it out yesterday to local campsite couldn�t seem to get water to come through to taps but I forgot my gas bottle , I found switches above sink still didn�t work only thing I found in the caravan was a carver cascade 2 like the image attached - does this caravan require gas bottle to flow water also.. aqua roll and connect on the side of the caravan
If you are new to caravans it would be a good idea to get a copy of the Haynes Caravan Handbook which will explain how everything works.
Basically this is how the water system works:
Fill the aquaroll, fit the pump into the aquaroll and plug it in to the socket on the outside of the caravan.
Switch on the 12volt system, you'll need a fully charged leisure battery fitted, and turn on the taps. There should be a switch for the pump on the control panel so switch this on before you forget it. Turn on a tap and you should hear the pump working and the water will start to flow, it will take a while to fill the water heater and pump through the whole system.
The system will be full of air to start with and you will have to go round every tap to bleed the air through.
When all the taps are supplying water without splurging the system will be ready for use.
You can now switch the water heater on if you wish, you will need gas or 230v for this.
Has this caravan been serviced recently?
If it hasn't it would be a good idea to get it serviced for safety reasons. If you have it serviced by a mobile engineer they'll be able to explain how everything works.
I'm sure I've missed something out of my instructions but it should get you started on the right track.
Amazing family weekend with old steam engines, classic car displays, market stalls, and full catering and bar. And camping on site - Save £25 by booking in advance.