Joined: 16/7/2023 Standard Member
Forum Posts: 2
| Site Reviews Total: | 0 |
|
| Site Reviews 2026: | 0 |
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
|
| Site Nights 2026: | 0 |
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
|
Hi,
Just taken my 2 berth caravan out for first time in months and the battery was flat, so couldn`t use the mover - not a problem, just hooked up and off we went. After 4 days on a site, I found the battery was only 3.75v - it hadn`t charged up. I found the switch to pass power through to the charger was not ON. Now got 11.85v in battery, same at Carver electronic control unit, but nothing happens when I switch ON the remote. I changed the remote batteries and thought to re-pair the remote/electronic control unit, as it was still not working. Instructions to `pair` states, hold button down at control unit for approximately 5secs, a green light on the control unit should illuminate, then quickly press remote button twice, within 1sec. The green light does not illuminate, even after 20secs??? Before we left home, when I tried to use the mover, it just clicked a couple of times and moved a tiny bit - I`m talking about 2mins on a clock, after that, nothing. I`m thinking I may have burnt out the windings during that 10sec attempt to switch it on, and need a new control unit??????? Any advice would be gratefuly received TIA
|
Topic: Carver caravan mover
via mobile 16/7/2023 at 4:55pm
